A correctly formatted and downloadable copy of the Technical Specification can be found at:

Copy of RETIRED eduroam(UK) Technical Specification 1.4

That page also contains handy Summary of Requirements and Summary of Recommendations checklists which may help when conformance assurance checking of your deployment.

eduroam(UK) Technical Specification 1.4 - now superseded by version 1.5

14 July 2016

Originator: Josh Howlett

Revisions by: Edward Wincott

Advisors: Dr Alan Buxey, Scott Armitage, Alec Edworthy

OD/MO/EDUROAM/DOC/001

Contents:

1.  Introduction

• 1.1. Acknowledgements
• 1.2. Overview
• 1.3. Change log 

2. Common Requirements and Recommendations

• 2.1. Participation
• 2.2. Technical Contact
• 2.3. Logging
• 2.4. RADIUS Hosts
• 2.5. eduroam Service Information Website

3. Home Organisation Requirements and Recommendations

• 3.1. User Names
• 3.2. Logging
• 3.3. EAP Authentication
• 3.4. Test Account
• 3.5. User Security Awareness
• 3.6. RADIUS Hosts

4. Visited Organisation Requirements and Recommendations

• 4.1. Network Presentation
• 4.2. RADIUS Forwarding
• 4.3. NAS Requirements
• 4.4. Securing Host Network Configuration
• 4.5. IP Forwarding
• 4.6. Application and Interception Proxies
• 4.7. eduroam Service Information Website
• 4.8. SSID
• 4.9. Network Addressing
• 4.10. WPA
• 4.11. WPA2

5. Appendices

• 5.1. Appendix I – Summary of Requirements
• 5.2. Appendix II - Summary of Recommendations
• 5.3. Appendix III – Glossary
• 5.4. Appendix IV - Bibliography

1.Introduction

1.1. Acknowledgements

The authors would like to acknowledge the many important contributions provided by the following during the original production and subsequent revisions of this document:

• the members of the Jisc (formerly Janet) 802.1X Special Interest Group and the Wireless Access Group (WAG);
• the subscribers of the Jisc Wireless-Admin mailing list;
• the members of the GÉANT Mobility Task-Force (TF-Mobility);
• the members of European eduroam confederation national roaming operator (NRO) community;
• the Janet Location Independent Networking (LIN) National Trial participants.

The authors also thank colleagues at Jisc (formerly Janet) and particularly the eduroam(UK) Technical Support team based at Loughborough University for their contributions, support and assistance.

1.2. Overview

This document is the Technical Specification for the federated eduroam service operated by Jisc for participants in the UK and associated territories and is effective from 14th July 2016. It complies with the requirements mandated by the GÉANT European confederation policy (GN3-12-194) [1]. This document is subject to periodic revision; changes will be notified to registered contacts at participating organisations and to the community via the Jisc Community eduroam website [2], at which the most recent revision will be found.

1.2.1. Using this Document

This document uses the conventions specified in RFC 2119 [3] for indicating requirement levels.

This document consists of five sections. The first (‘Introduction’) and fifth (‘Appendices’) are for informational purposes only. The latter section contains four appendices: two summaries of the requirements and recommendations laid out in this document; a glossary defining various technical and non-technical terms; and a bibliography.

The remaining three sections are normative. These are:

• Section 2 (‘Common Requirements and Recommendations’). This section is concerned with general requirements that are common for all participating organisations.
• Section 3 (‘Home Organisation Requirements and Recommendations’). This section is concerned with the requirements for Home organisations, and primarily the authentication of users.
• Section 4 (‘Visited Organisation Requirements and Recommendations’). This section is concerned with the requirements for Visited organisations, and primarily those relating to the visitor network.

1.3. Change log

To assist the reader the most significant changes to the requirements have been italicised.

1.3.1. Changes from version 1.3

• All references to ‘Janet’ in an organisational context changed to ‘Jisc’; references to Janet in the context of the network and network-related documentation remain unaltered.
• Overview, reference 1 to GÉANT European confederation policy, updated. Scope of document updated to accommodate provision of service in all UK associated territories.
• Section 4 introduction: removed explanation of the historical legacy of the JRS technical standards tiers system, which allowed WPA and captive portal technologies to be included in service variations as defined in previous versions of this specification up to and including v1.1.
• New Requirement 4: participating organisations must accurately assert both the service type and compliance level, and the operational status of their service via the Support server; and these assertions must be kept up to date. v1.3 requirement 4 renumbered to 5 and subsequent requirements numbering incremented by 1.
• Requirement 5 (previously 4) worded to improve readability and clarity.
• Requirement 6 (previously 5) changed timestamp requirement to be ‘in GMT’ to the more correctly applicable ‘UTC’ standard.
• Requirement 11 (previously 10) revised to remove requirement for ORPS to be reachable on accounting ports UDP/1813 or UDP/1646 since NRPS no longer forward accounting requests to ORPS, and wording updated to more RFC conventional style.
• Requirement 14 deleted because whilst the NRPS will continue to respond to accounting requests if forwarded to them, the content of the requests is not important as they are not forwarded onwards. Subsequent requirements numbering decremented by 1.
• Requirement 16 deleted because provided that the requirements relating to logging are satisfied, exactly how organisations do this is outside the scope of this specification. It is for the organisation to determine what logging of RADIUS accounting requests and attributes are appropriate. Subsequent requirements numbering decremented by 1.
• Discussion 2.4.3: paragraph 3, 4 edited to remove references to accounting ports (1813 and 1646). New paragraph appended to explain reasoning behind deprecation of forwarding of accounting requests and notice of future mandatory requirement to not forward such requests to the NRPS.
• Requirement 19.4 (previously 20.4): reference to ‘User ID’ changed to ‘User-Name’ to clarify need for all parts of the user name to be logged.
• Requirement 19.7 added: Operator-Name attribute must logged if present in Access-Request.
• Requirement 22 (previously 23) reworded to more accurately tie the requirements relating to test accounts to the capability of the Support server
• Requirement 23 (previously 24) changed to align with current self-service process of making updates to test account details through the Support server web portal rather than via the support team personnel.
• Discussion 3.4.3 updated to reflect withdrawal of support for PAP in the Support server monitoring system and the self-service nature of the Support web portal now.
• Recommendation 3.6.2 reworded to improve readability.
• Discussion 3.6.3 updated to more accurately qualify NAS-Port-Type attribute and to include Service-Type in the explanation.
• Section 4 introduction: base engineering standards summary table updated to reflect the requirement that WPA/TKIP must not be supported in any circumstances and IPv6 specification uprated to SHOULD.
• Requirements 31.3 (previously 32.3) and 31.4 (previously 32.4) deleted.
• New Requirement 39: the setting on the Support server web portal to enable Status-Server requests sending from the NRPS to an ORPS MUST NOT be enabled if the ORPS cannot correctly respond to such requests.
• New recommendations 16 and 17 inserted relating to utilisation of and response to Status-Server queries if ORPS have such capability. Subsequent recommendation numbering adjusted.
• Visited service IP forwarding: list of ports and protocols that must as a minimum be permitted updated to remove LDAP and POP. Table tidied up.
• Recommendation 4.5.2 updated to specify ‘the Internet’ rather than specifically ‘Janet’ since Visited network services providing access to the Internet can be implemented other than via a Janet connection.
• New Requirement 48: Transport Layer Security (TLS)/Secure Sockets Layer (SSL) interception proxies MUST NOT be applied to network services for eduroam visitors.
• Discussion 4.6.3 expanded to include reference to TLS interception and noting that users when at their home organisation may be connected to non-eduroam network services.
• Requirement 50 (previously 49) reworded for clarification.
• Discussion 4.8.2: paragraph relating to XP deleted since XP is no longer a current operating system.
• Discussion 4.9.4 updated as IPv6 is becoming increasingly widely deployed.
• Requirement 56 (previously 55) reworded to explicitly disallow WPA and TKIP.
• Recommendation paragraph 4.10.2 and Recommendation 22 removed since no longer applicable.
• Discussion paragraph 4.10.3 removed since text on WPA and the transition period no longer relevant.
• Discussion paragraph 4.11.2 updated and altered to reflect specification that WPA2/AES is the only standard and cipher permitted in the UK, although noting that in some countries mixed TKIP/AES environments may be encountered.
• Appendices updated.

2. Common Requirements and Recommendations

This section is concerned with the requirements that are common to all participants.

2.1. Participation

2.1.1. Requirements

1. All participating organisations MUST observe the requirements set out in section 2 of this document.
2. Participants that choose to participate as a Home organisation MUST observe the requirements set out in section 3 of this document.
3. Participants that choose to participate as a Visited organisation MUST observe the requirements set out in section 4 of this document.
4. Using the eduroam(UK) Support web portal, participating organisations MUST assert the type of service being provided or being worked towards and the current level of compliance of such a service with this Technical Specification. The current operational level of the service MUST also be asserted.

2.1.2. Recommendations

1. Participants SHOULD observe the recommendations set out in this document.

2.1.3. Discussion

Only members of the eduroam(UK) federation may participate and provide eduroam services in the UK and all members must abide by this Technical Specification.

A Visited service provider is one that makes available a network connectivity service for eduroam users. A Home organisation is one that provides an authentication service for its users. The two service types can be provided independently of each other.

It is anticipated that most organisations will participate as both a Visited and a Home service type provider; however participation as either Visited-only or Home-only is acceptable.

Although it is recommended that organisations participate as Visited organisations, it is not mandatory. This allows an organisation that may be unable or unwilling to act as a network access service provider (SP) to participate as a Home organisation and enable its own users to benefit from Visited services provided by other participants.

Participation as a Home organisation is not mandatory, although it is recommended.  This permits an organisation that may be unable, unwilling or ineligible to act as an identity provider (IdP) and provide an authentication service, to participate as a Visited organisation and offer visitors network access through eduroam.

Organisations may partially or wholly out-source provision of their Home or Visited services. In such situations the obligations of the participant to comply with this specification do not alter; therefore the terms of the agreement with the out-source provider should reflect this.

Alternatively, services may be provided (possibly on a commercial basis) in partnership with other organisations in which the partner organisation is an independent member of the eduroam(UK) federation, as would be the case where the partner operates its own RADIUS infrastructure and possibly authentication system, for instance on behalf of a group of small institutions. This can be described as the provision of a managed Visited or managed Home service.

2.2. Technical Contact

2.2.1. Requirements

5. Participants MUST designate a technical contact that can be contacted using e-mail and telephone during normal business hours. The contact may be either a named individual or an organisational unit. Arrangements must be made to cover for absence of a named technical contact owing to eventualities such as illness and holidays.

2.2.2. Discussion

A technical contact is required to facilitate the resolution of matters such as technical problems and abuse. Participants should ensure that changes in staff are promptly advised to eduroam(UK).

2.3. Logging

2.3.1. Requirements

6. Every log entry MUST state the date and time it was logged, derived from a reliable time source. The timestamp MUST be in UTC.
7. Logs MUST be kept for a minimum period of at least three months.

2.3.2. Discussion

Accurate logging is necessary for resolving technical problems and tracking abuse. The ability of a host to refer to a standard time is necessary for the production of logs that can be compared with logs maintained at other organisations. Jisc offers a Network Time Protocol [4] (NTP) service [5] that can be used for synchronising the clocks of hosts.

Whilst the minimum period for retention of logs is specified above, the maximum period is a matter for the organisation's general data protection compliance. It is recommended that raw logs should not be kept indefinitely and that six months is a commonly used threshold for deletion or anonymization. The Janet ‘Logfiles’ [6] technical guide provides further information and advice regarding logging and should be referred to for definitive recommendation on this matter.

2.4. RADIUS Hosts

2.4.1. Requirements

8. Participants’ RADIUS (Remote Authentication Dial In Service) clients and servers MUST comply with RFC 2865 [7] and RFC 2866 [8].
9. Participants’ RADIUS clients’ and servers’ clocks MUST be configured to synchronise regularly with a reliable time source
10. Participants MUST deploy at least one ORPS (organisational RADIUS proxy server).
11. Participants’ ORPSs, if operating a Home (IdP) service, MUST be reachable from the eduroam(UK) National RADIUS Proxy Servers (NRPS). ORPS SHOULD be configured to listen on UDP/1812 and SHOULD NOT be configured to listen on UDP/1645.  ORPS using RadSec MUST be reachable from the NRPSs on TCP port 2083.
12. Participants using RadSec MUST use X.509 certificates provided by the GÉANT eduPKI service [9] to identify their ORPSs.
13. If the ORPS’s RADIUS implementations support it, both the NRPS and eduroam(UK) Support Server MUST be able to receive responses to Internet Control Message Protocol (ICMP) Echo Requests they send to participants’ ORPSs.
14. The following RADIUS attributes MUST be forwarded unaltered by participants’ ORPSs if present in RADIUS Access-Request, Access-Challenge, Access-Accept or Access-Reject messages.

14.1. User-Name

14.2. Reply-Message

14.3. State

14.4. Class

14.5. Message-Authenticator

14.6. Proxy-State

14.7. EAP-Message

14.8. MS-MPPE-Send-Key

14.9. MS-MPPE-Recv-Key

14.10. Calling-Station-Id

14.11. Operator-Name

14.12. Chargeable-User-Identity

15. Participants’ ORPSs MUST log all RADIUS authentication requests exchanged with the NRPS; the following information must be recorded.

15.1. The value of the user name attribute in the request.

15.2. The value of the Calling-Station-Id attribute in the request.

2.4.2. Recommendations

2. Participants SHOULD deploy a secondary ORPS.
3. Participants SHOULD NOT forward accounting messages to the NRPS.

2.4.3. Discussion

The ORPS is the interface between a participating organisation’s network and the eduroam(UK) RADIUS proxy infrastructure. A secondary ORPS should be implemented to improve the resilience of the participant’s service and by ensuring that a receptive ORPS is always online, to minimise RADIUS packet queuing on the NRPS.

The inclusion of spurious RADIUS attributes in packets exchanged between organisations can have unexpected effects and result in problems, it is therefore best practice to filter out unnecessary attributes. It is however essential that the key attributes detailed in this specification are not filtered and must be retained in forwarded packets.

RADIUS authentication typically uses port UDP/1812; port UDP/1645 is deprecated but is in occasional use and so whilst not recommended its use is also permitted.

Detailed logging of authentication requests and accounting requests if applicable is necessary for problem resolution and the tracking of network abuse. Note that the eduroam(UK) Policy (available from the Jisc eduroam website) states that Visited organisations have responsibilities in relation to the online activities of visitors, and consequently it is in the interests of the Visited service provider to ensure that this logging is accurate and complete.

The IP addresses of the NRPSs and the eduroam(UK) Support Server may be obtained by enquiry through the Janet Service Desk or DNS….

RADIUS accounting is not relevant in eduroam outside of participants’ networks and receiving and responding to these by the NRPS consumes processing resources that could be better utilised. In addition, the configuration of ORPS to forward accounting messages to the NRPS represents unnecessary complication. Forwarding of accounting messages to the NRPS is therefore now deprecated and participants should check the configuration of their ORPS and remove such behaviour if found. The next release of this technical specification will include the mandatory requirement that ORPS MUST NOT forward accounting messages to the NRPS.

2.5. eduroam Service Information Website

2.5.1. Requirements

16. Participants MUST publish an eduroam service information website which MUST be generally accessible from the Internet and, if applicable, within the organisation to allow visitors to access it easily on site. The website MUST include the following information as a minimum.

16.1. The text of, or a link to, the participant’s acceptable use policy (AUP), where applicable.

16.2. A link to the eduroam(UK) Policy [10].

16.3. The eduroam logo linking to the eduroam website [11].

16.4. The type of service offered where the scope of the eduroam service is limited, such as Visited-only or Home-only; and the operational status of the service if the web page is published before the service becomes operational.

16.5. A link to the eduroam(UK) sites listing and location web page [12].

2.5.2. Discussion

The participant’s eduroam service information website is used to publish relevant information to help visitors and local users at the organisation connect to and make use of the participant’s eduroam service.

Since users will have a reasonable expectation of being able to connect to eduroam wherever the eduroam SSID is broadcast, any limitation affecting users’ ability to utilise the service, such as Visited-only and Home-only service types, must be advertised on the organisation’s eduroam website.

Note that Visited organisations’ eduroam service information websites are subject to further requirements; these are set out in that section of this specification.

3. Home Organisation Requirements and Recommendations

This section is concerned with the requirements pertaining to Home organisations.

3.1. User Names

3.1.1. Requirements

17. Home organisations’ eduroam user names MUST conform to the Network Access Identifier (NAI) specification (RFC 4282 [13]), i.e. comprise identity name, @ and realm components.
18. The realm component MUST conclude with participant’s realm name, which MUST be a domain name in the global Domain Name System (DNS) that the Home organisation administers, either directly or by delegation.

3.1.2. Discussion

The purpose of the NAI is to specify a user name format for use within roaming services. Compliance with this requirement reduces the likelihood of problems arising from applications (such as RADIUS proxies) parsing user names in unexpected ways. Note that the use of privacy-preserving anonyms or pseudonyms is permitted, although care must be taken to ensure that the identity of the end user can always be established by the Home organisation.

One of the major elements of the eduroam ethos is that users should be able to connect to eduroam services in a seamless manner, without the user having to alter credentials in supplicant software. The requirement that only RFC 4282 compliant user names are permitted for use with eduroam, whether at the user’s Home site or when roaming, ensures that users are more readily able to connect wherever an eduroam service is encountered.

3.2. Logging

3.2.1. Requirements

19. Home organisations MUST log all authentication attempts; the following information MUST be recorded.

19.1. The time that the authentication request was received.

19.2. The authentication result returned by the authentication database.

19.3. The reason given, if any, if the authentication was denied or failed.

19.4. User-Name in the outer-EAP and the User-Name from the inner-EAP (if a tunnelled EAP method is used).

19.5. Chargeable-User-Identity (CUI) if one was generated.

19.6. Calling-Station-ID.

19.7. Operator-Name if one was present in Access-Request.

3.2.2. Discussion

Detailed logging of authentication is necessary for problem resolution and investigation of network abuse.

3.3. EAP Authentication

3.3.1. General Requirements

20. Home organisations MUST configure their RADIUS server to authenticate one or more Extensible Authentication Protocol [14] (EAP) types.
21. Home organisations MUST select an EAP type, or EAP types, for which their RADIUS server will generate symmetric keying material for encryption ciphers and encapsulate the keys, following section 3.16 of RFC 3580 [15], within RADIUS Access-Accept packets.

3.3.2. Recommendations

4. Home organisations SHOULD choose a type, or types, that fulfil all or most of the ‘mandatory requirements’ section of RFC 4017 [16].

4.1. The EAP types TLS [17], PEAP [18], and TTLS [19] are recommended.

3.3.3. Discussion

RFC 4017 defines requirements for EAP types used on IEEE 802.11 [20] LANs. While it is recommended that Home organisations select an EAP type (or types) that fulfils as many of these requirements as possible, it is mandatory that the ‘Generation of symmetric keying material’ requirement is met, and that the keys are returned in the RADIUS Access-Accept packet.

The Janet ‘Extensible Authentication Protocol’ [21] technical sheet provides further information on EAP.

3.4. Test Account

3.4.1. Requirements

22. If the Home organisation has chosen to support PEAP or TTLS type methods, the organisation MUST create an authenticatable test account and the relevant methods MUST be supported by the test account; additionally PAP may be used.
23. If the password for this account is changed then the eduroam(UK) Support web portal MUST be updated immediately to reflect this change.  If it is believed the password has been compromised then the password MUST be changed immediately and the eduroam(UK) Support portal updated as soon as possible.

3.4.2. Recommendations

5. The test account SHOULD be created in the organisation’s primary user database. If more than one user database exists, it SHOULD be created in the user database that is likely to be most authenticated against.
6. Other privileges SHOULD NOT be assigned to the test account.
7. The test account SHOULD be configured to allow at least five consecutive failed authentication attempts without the account being locked.

3.4.3. Discussion

A test account is required for monitoring and test purposes by eduroam(UK) Support. The Support server monitoring system currently supports PEAP, TTLS methods and the method selected by the participating organisation should match the method most commonly used by the organisation. PAP may be configured for the test account as this is still supported by the on-demand test. The credentials for the test account will only be known by eduroam(UK) Support and the Home organisation. The test account credentials are supplied to eduroam(UK) support via the eduroam(UK) Support web portal and should be updated there whenever changes are made.

3.5. User Security Awareness

3.5.1. Recommendations

8. Home organisations SHOULD educate their users to use protocols that provide appropriate levels of security when using eduroam. 

3.5.2. Discussion

Home organisations should be mindful of the fact that their users’ communications are forwarded over networks with unknown security characteristics, and so eduroam does not provide any guarantees regarding the privacy of this data.

3.6. RADIUS Hosts

3.6.1. Requirements

24. Home organisations MUST attempt to authenticate all authentication requests forwarded from the NRPS.

3.6.2. Recommendations

9. Where an authentication request is received from a NRPS, as opposed to being received from an internal RADIUS client or NAS, a Home organisation’s Access-Accept reply SHOULD NOT contain dynamic VLAN assignment attributes, unless a mutual agreement is in place with the Visited organisation. This may be achieved by the Home organisation filtering out dynamic VLAN assignment attributes if present in Access-Accept packets sent to the NRPS.
10. If the Home RADIUS server supports Chargeable-User-Identity (CUI) then Access-Accept replies SHOULD contain the CUI attribute, where CUI is solicited in the authentication request from the Visited organisation, as described in RFC 4372 [22].    

3.6.3. Discussion

It has been noticed that some participating organisations have applied filters to drop authentication requests where the NAS-Port-Type attribute does not match ‘Wireless - IEEE 802.11’ and/or Service-Type = ‘Framed-User’. However some NASs do not send such attributes and there is no requirement to do so within this Technical Specification. All authentication requests forwarded by the NRPSs are valid and therefore must not be filtered.

4. Visited Organisation Requirements and Recommendations

This section is concerned with the requirements pertaining to Visited organisations.

The ‘base level engineering standards’ table below summarises and highlights the standards and features of greatest impact on users:

	SSID	WPA/TKIP	WPA2/AES	NAT	Application Proxy	Port Restrictions	IPv6	Injection of O-N
Compliance:	eduroam	MUST NOT	MUST	MAY	MAY	MAY	SHOULD	SHOULD